Installation Instructions
Table Of Contents
- About This Document
- Contents
- 1 Changes in AAU3940 Installation Guide
- 2 Overview
- 3 Installation Preparations
- 4 Unpacking Check
- 5 Installation Process
- 6 (Optional) Installing an ODM
- 7 Preprocessing the AAU Maintenance Cavity
- 8 Lifting an AAU
- 9 Installing an AAU
- 10 Installing AAU Cables
- 11 Closing a Maintenance Cavity
- 12 (Optional) Installing a Cord Cover for an ODM
- 13 Adjusting the Horizontal Azimuth of an Antenna
- 14 Installation Checklist
- 15 Powering on an AAU
- 16 Appendix
Figure 9-9 Installing an AAU
Step 4 Install the removed landscaping cover.
NOTE
It is recommended that the landscaping cover be installed after cables are connected.
1. Put the landscaping cover on the AAU, and press the elastomer on the mounting bracket
when the landscaping cover reaches the top of the mounting bracket so that it can slide
down.
2. Ensure that the three support braces of the landscaping cover slide into the troughs on the
bottom of the mounting bracket.
AAU3940
Installation Guide
9 Installing an AAU
Issue 01 (2015-01-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
47