Installation Instructions

Table Of Contents

Table 10-1 Specifications of an AAU PGND cable

Cable End Connecting to

the AAU

End Connecting to

the Ground Bar

Color

AAU PGND cable OT terminal (M6, 16

or 0.025 in.

)

OT terminal (M8, 16

or 0.025 in.

)

Green and yellow

Procedure

Step 1 Prepare a PGND cable.

1. Cut the cables to the length suitable for the actual cable route.

2. Add OT terminals to both ends of the cables according to the instructions in Assembling

the OT Terminal and the Power Cable.

Step 2 Install the PGND cable.

1. Connect one end of the PGND cable with an M6 OT terminal to the ground bar of the

mounting kits for the AAU (shown by

), and use a torque wrench to tighten the ground

bolt to 4.8 N·m (42.48 lbf·in.).

Figure 10-9, Figure 10-10, and Figure 10-11 show the methods of installing PGND cables

when an AAU is installed on a pole, when an AAU is installed on a wall, and when an AAU

is installed on the top of a pole, respectively.

AAU3940

Installation Guide 10 Installing AAU Cables

Issue 01 (2015-01-15) Huawei Proprietary and Confidential