Installation Instructions
Table Of Contents
- About This Document
- Contents
- 1 Changes in AAU3940 Installation Guide
- 2 Overview
- 3 Installation Preparations
- 4 Unpacking Check
- 5 Installation Process
- 6 (Optional) Installing an ODM
- 7 Preprocessing the AAU Maintenance Cavity
- 8 Lifting an AAU
- 9 Installing an AAU
- 10 Installing AAU Cables
- 11 Closing a Maintenance Cavity
- 12 (Optional) Installing a Cord Cover for an ODM
- 13 Adjusting the Horizontal Azimuth of an Antenna
- 14 Installation Checklist
- 15 Powering on an AAU
- 16 Appendix
Figure 10-13 Installing equipotential cables when multiple AAUs are installed on a pole
Step 4 Lay out the cables according to the instructions in Cabling Requirements, and use cable ties to
bind them.
Step 5 Label the installed cables according to the instructions in Attaching a Sign Plate Label.
----End
10.3 Installing an AAU Power Cable
This section describes the process and precautions for installing an AAU power cable.
Prerequisites
The AAU maintenance cavity has been opened.
Context
The following table describes AAU power cables used in different scenarios.
AAU3940
Installation Guide
10 Installing AAU Cables
Issue 01 (2015-01-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
67