Installation Instructions
Table Of Contents
- About This Document
- Contents
- 1 Changes in AAU3940 Installation Guide
- 2 Overview
- 3 Installation Preparations
- 4 Unpacking Check
- 5 Installation Process
- 6 (Optional) Installing an ODM
- 7 Preprocessing the AAU Maintenance Cavity
- 8 Lifting an AAU
- 9 Installing an AAU
- 10 Installing AAU Cables
- 11 Closing a Maintenance Cavity
- 12 (Optional) Installing a Cord Cover for an ODM
- 13 Adjusting the Horizontal Azimuth of an Antenna
- 14 Installation Checklist
- 15 Powering on an AAU
- 16 Appendix
13 Adjusting the Horizontal Azimuth of an
Antenna
This section describes the procedure for adjusting the horizontal azimuth of an antenna based
on coverage requirements after all cables are installed.
Context
The normal line of an antenna is located on the front of the antenna, as shown in the following
figure. Before adjusting the horizontal azimuth of an antenna, determine the direction towards
which the antenna faces according to the normal line.
AAU3940
Installation Guide 13 Adjusting the Horizontal Azimuth of an Antenna
Issue 01 (2015-01-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
89