User's Manual

6
Switching to sleep mode
The ColorBand features a pedometer and sleep mode. Sleep data is only recorded when the ColorBand is in sleep
mode.
Switching to sleep mode automatically
Set your sleep time and the ColorBand will automatically switch from pedometer mode to sleep mode.
1. Touch > > Sleep time (for Android users) or > > your ColorBand's name > Sleep
time (for iPhone users), and specify your time range.
2. Touch the back button on your phone, and then touch Sync.
The settings will be synced to your ColorBand.
Tip: Automatic sleep mode cannot be disabled. If you need to work nightshifts or stay out later at night, you may not
want your ColorBand to automatically switch to sleep mode during this time. In this case, set the sleep mode start time
to a daytime hour and the sleep duration to 1 minute. When you are ready to go to bed, manually switch to sleep
mode.
Switching to sleep mode manually
If you're tired or drowsy and want to take a nap, you can switch to sleep mode manually, ensuring that you don't lose
any of your sleep data.
Turn on the ColorBand's screen, and touch and hold the function button for 3 seconds until SLEEP blinks on the screen.
Touch the function button again. When OK is displayed, sleep mode has been activated.
Once you've had a rest, the same method can be used to switch back to pedometer mode.