Before use Choosing your earbud Choose the earbud and ear tip that are most comfortable in your ear. Wearing your headphones Adjust the headphones so they rest in a comfortable and secure position.
Using your headphones Powering on/off To power on the headphones, press and hold the function button for 2 to 4 seconds. To power off the headphones, press and hold the function button for over 4 seconds. Pairing Pairing with your phone for the first time 1. Power on your headphones to automatically enter Bluetooth pairing mode, where the indicator blinks red and blue, and plays a voice alert. 2. Enable Bluetooth on your phone to pair with the headphones.
Re-pairing 1. Press and hold the function button for over 4 seconds to power on your headphones and enter Bluetooth pairing mode. You will hear a voice message instructing you to wait for the Bluetooth connection. The red-blue indicator will blink. 2. Enable Bluetooth on your phone to pair with the headphones. The headphones will enter Bluetooth pairing mode if they are not connected to a phone within 3 minutes of being powered on. The headphones will power off automatically after 8 minutes.
During call: To end the call, press the function button. To switch between the phone and the headphones, press and hold the function button for 2 to 4 seconds. To increase the volume, press the volume up button. To decrease the volume, press the volume down button. When there is a new incoming call during a call: To end the current call and answer the new call, press the function button. To hold the current call and answer the new call, double-press the function button.
Magnetic Hall effect features End a call by attracting the earpieces. Pause media playback by attracting the earpieces. Resume playback automatically by separating the earpieces (only valid for 5 minutes). Stop heart rate monitoring by attracting the earpieces. Continue heart rate monitoring by separating the earpieces. Some third-party players may have a delay of several seconds when resuming music playback. The length of the delay depends on the phone model.
The heart rate monitoring function is disabled by default when you power on the headphones. To enable/disable the heart rate monitoring function, press and hold the sport button for over 4 seconds. To start or pause heart rate monitoring, press and hold the sport button for 2 to 4 seconds. When your headphones are paired with corresponding apps and you have enabled workout mode, press the sport button to get a voice report about your current workout.
Charging your headphones During charging, the indicator is steady red. When the headphones are fully charged, the indicator is steady blue. When you attach the USB cable for charging, the headphones will power off automatically. If the headphones power off due to insufficient battery level, charge the headphones within 30 days. Otherwise, charging failure may occur.
and other medical equipment, such as pacemakers, cochlear implants, and hearing aids. Consult the manufacturer of your medical equipment for more information. Keep this device at a minimum distance of 15 cm from implantable medical devices (such as pacemakers and cochlear implants). Keep the volume as low as possible during music playback and calls to avoid hearing damage. Prolonged exposure to high volumes may result in permanent hearing damage.
supervised by an adult. Do not use unauthorized or incompatible power supplies, chargers, or batteries to avoid hazards such as fire and explosion. Do not attempt to disassemble or remanufacture the device, insert foreign objects into it, or immerse or expose it to water or other liquids. Doing so may lead to fire, explosion, or other hazards. Do not drop, squeeze, or pierce the device. If excessive pressure is applied to the device, the device may short circuit or overheat.
environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment. For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer or household waste disposal service or visit the website http://consumer.huawei.com/en/.
Frequency bands and power (a) Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local carrier for more details. (b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard.
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. Son fonctionnement est soumis aux conditions suivantes : (1) l'appareil ne doit pas causer d'interférence et (2) l'appareil doit accepter toute interférence, y compris une interférence pouvant entraîner un fonctionnement non désiré. Fonctionnement sur soi L'appareil respecte les spécifications RF s'il est utilisé près de votre oreille ou à une distance de 0cm de votre corps.
