User's Guide
Table Of Contents
- Box contents
- Your headset at a glance
- Charging your headset
- Wearing your headset
- Choose the ear tip size that is most comfortable. Rest the soft U-shaped support in your ear and gently insert the earphone into your ear. The ear tip should fit comfortably and the headset should not feel loose or tight.
- If the headset is too loose, attach the ear hook to the headset and hook it over your ear.
- Use a neck strap and avoid placing the headset in your bag or pocket to ensure that the headset button is not pressed accidentally.
- Turning the headset on or off
- Pairing your headset with your phone
- Keep your Bluetooth headset and phone as close as possible and away from obstructions, otherwise call and music quality may be affected, or the headset may disconnect from your phone.
- Using for the first time
- 1. When you turn on your headset for the first time, it will enter pairing mode and the indicator will blink orange and blue.
- 2. Enable Bluetooth on your phone, search for available devices and then select Honor AM07. You will hear a "Your headset is connected" prompt from your headset and the indicator will turn blue for 1 second when the headset has successfully paired wit...
- Connecting to a previously paired phone
- Connecting to a new phone
- Connecting to two phones at the same time
- Adjusting the volume
- Answering or declining incoming calls
- Listening to music
- Using the headset to control your phone camera
- Intelligent voice control
- Handy app
- Indicator status
- Important safety information
- Environmental protection
- EU regulatory conformance
- FCC Regulatory Compliance
- Legal Notice
- Privacy Policy
16
Without adult supervision, do not let children use your earphones. The small
parts included with your earphones can be a choking hazard for children.
Dispose of or reuse your earphones and the accessories according to local
laws and regulations. Improper battery use may lead to fire, explosion, or
other hazards.
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
For pluggable devices, the socket-outlet shall be installed near the devices and
shall be easily accessible.
Unplug the charger from electrical outlets and the device when not in use.
Ensure that the charger meets the requirements of Clause 2.5 in
IEC60950-1/EN60950-1 and has been tested and approved according to
national or local standards.