User's Guide
Table Of Contents
- Box contents
- Your headset at a glance
- Charging your headset
- Wearing your headset
- Choose the ear tip size that is most comfortable. Rest the soft U-shaped support in your ear and gently insert the earphone into your ear. The ear tip should fit comfortably and the headset should not feel loose or tight.
- If the headset is too loose, attach the ear hook to the headset and hook it over your ear.
- Use a neck strap and avoid placing the headset in your bag or pocket to ensure that the headset button is not pressed accidentally.
- Turning the headset on or off
- Pairing your headset with your phone
- Keep your Bluetooth headset and phone as close as possible and away from obstructions, otherwise call and music quality may be affected, or the headset may disconnect from your phone.
- Using for the first time
- 1. When you turn on your headset for the first time, it will enter pairing mode and the indicator will blink orange and blue.
- 2. Enable Bluetooth on your phone, search for available devices and then select Honor AM07. You will hear a "Your headset is connected" prompt from your headset and the indicator will turn blue for 1 second when the headset has successfully paired wit...
- Connecting to a previously paired phone
- Connecting to a new phone
- Connecting to two phones at the same time
- Adjusting the volume
- Answering or declining incoming calls
- Listening to music
- Using the headset to control your phone camera
- Intelligent voice control
- Handy app
- Indicator status
- Important safety information
- Environmental protection
- EU regulatory conformance
- FCC Regulatory Compliance
- Legal Notice
- Privacy Policy
19
FCC statement
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this device does
cause harmful interference to radio or television reception, which can be
determined by turning the device off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the device and receiver.
--Connect the device into a socket on a circuit different from that to which the
receiver is connected.