User's Guide
Table Of Contents
- Box contents
- Your headset at a glance
- Charging your headset
- Wearing your headset
- Choose the ear tip size that is most comfortable. Rest the soft U-shaped support in your ear and gently insert the earphone into your ear. The ear tip should fit comfortably and the headset should not feel loose or tight.
- If the headset is too loose, attach the ear hook to the headset and hook it over your ear.
- Use a neck strap and avoid placing the headset in your bag or pocket to ensure that the headset button is not pressed accidentally.
- Turning the headset on or off
- Pairing your headset with your phone
- Keep your Bluetooth headset and phone as close as possible and away from obstructions, otherwise call and music quality may be affected, or the headset may disconnect from your phone.
- Using for the first time
- 1. When you turn on your headset for the first time, it will enter pairing mode and the indicator will blink orange and blue.
- 2. Enable Bluetooth on your phone, search for available devices and then select Honor AM07. You will hear a "Your headset is connected" prompt from your headset and the indicator will turn blue for 1 second when the headset has successfully paired wit...
- Connecting to a previously paired phone
- Connecting to a new phone
- Connecting to two phones at the same time
- Adjusting the volume
- Answering or declining incoming calls
- Listening to music
- Using the headset to control your phone camera
- Intelligent voice control
- Handy app
- Indicator status
- Important safety information
- Environmental protection
- EU regulatory conformance
- FCC Regulatory Compliance
- Legal Notice
- Privacy Policy
6
2.
Enable Bluetooth on your phone, search for available devices and then select
Honor AM07. You will hear a "
Your headset is connected
" prompt from
your headset and the indicator will turn blue for 1 second when the headset
has successfully paired with your phone.
Connecting to a previously paired phone
The headset will automatically connect to a previously paired phone when it
turns on. You will hear a "Your headset is connected" prompt when the
headset has connected to your phone.
If the headset does not connect to your phone, press the headset button and
the headset will attempt to connect again.
If the headset still doesn't connect to your phone, turn it off. Then press and
hold the headset button for 7 seconds until the headset enters pairing mode.
Search for the headset on your phone and reconnect.