User's Guide
Table Of Contents
- Box contents
- Your headset at a glance
- Charging your headset
- Wearing your headset
- Choose the ear tip size that is most comfortable. Rest the soft U-shaped support in your ear and gently insert the earphone into your ear. The ear tip should fit comfortably and the headset should not feel loose or tight.
- If the headset is too loose, attach the ear hook to the headset and hook it over your ear.
- Use a neck strap and avoid placing the headset in your bag or pocket to ensure that the headset button is not pressed accidentally.
- Turning the headset on or off
- Pairing your headset with your phone
- Keep your Bluetooth headset and phone as close as possible and away from obstructions, otherwise call and music quality may be affected, or the headset may disconnect from your phone.
- Using for the first time
- 1. When you turn on your headset for the first time, it will enter pairing mode and the indicator will blink orange and blue.
- 2. Enable Bluetooth on your phone, search for available devices and then select Honor AM07. You will hear a "Your headset is connected" prompt from your headset and the indicator will turn blue for 1 second when the headset has successfully paired wit...
- Connecting to a previously paired phone
- Connecting to a new phone
- Connecting to two phones at the same time
- Adjusting the volume
- Answering or declining incoming calls
- Listening to music
- Using the headset to control your phone camera
- Intelligent voice control
- Handy app
- Indicator status
- Important safety information
- Environmental protection
- EU regulatory conformance
- FCC Regulatory Compliance
- Legal Notice
- Privacy Policy
8
Adjusting the volume
When making calls or listening to music, turn the headset button clockwise to
increase the volume or anticlockwise to reduce it.
When making calls or listening to music, keep the volume as low as
possible to avoid hearing damage. You will hear a prompt when the
maximum volume is reached.
Answering or declining incoming calls
Press the headset button to answer an incoming call.
Press the headset button twice to decline an incoming call.
Press the headset button to end a call.
If you receive a second call during an ongoing call, press the headset button
to end the current call and answer the incoming call. Alternatively, press the
headset button twice to put the current call on hold and answer the
incoming call.