User's Manual

AP2030DN
Product Description 3 Product Features
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
z
Compliance with IEEE 802.3u
z
Auto-negotiation of the rate and duplex mode and automatic switchover between the
Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
z
Compliance with IEEE 802.1q
z
SSID-based VLAN assignment
z
VLAN trunk on uplink Ethernet ports
z
Management channel of the AP uplink port in tagged and untagged mode
z
DHCP client, obtaining IP addresses through DHCP
z
Tunnel data forwarding and direct data forwarding
z
STA isolation in the same VLAN
z
Access control lists (ACLs)
z
Link Layer Discovery Protocol (LLDP)
z
Uninterrupted service forwarding upon CAPWAP channel disconnection
z
Unified authentication on the AC
z
AC dual-link backup
z
IPv6
3.3 QoS Features
QoS features supported by the AP are as follows:
z
Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to
implement priority-based data processing and forwarding
z
WMM parameter management for each radio
z
WMM power saving
z
Priority mapping for upstream packets and flow-based mapping for downstream packets
z
Queue mapping and scheduling
z
User-based bandwidth limiting
z
Adaptive bandwidth management (automatic bandwidth adjustment based on the user
quantity and radio environment) to improve user experience
z
Airtime scheduling
3.4 Security Features
Security features supported by the AP are as follows:
z
Open system authentication
z
WEP authentication/encryption using a 64-bit, 128-bit, or 152-bit encryption key
z
WPA/WPA2-PSK authentication and encryption (WPA/WPA2 personal edition)
z
WPA/WPA2-802.1x authentication and encryption (WPA/WPA2 enterprise edition)
z
WPA-WPA2 hybrid authentication
z
WAPI authentication and encryption