User's Manual

Table Of Contents

Table 5-6 Connections between wires and pins (using a straight-through cable as an example)

Matching Pins of Wires Wire Color

1 White-Orange

2 Orange

3 White-Green

4 Blue

5 White-Blue

6 Green

7 White-Brown

8 Brown

Step 3 Feed the cable into the plug, and crimp the connector, as shown in Figure 5-31.

NOTE

When inserting the cable, check from the side or bore of the plug to ensure that the cable is completely

seated in the plug.

Figure 5-31 Crimping the connector

Step 4 To complete the assembly of the other end, repeat Step 1 through Step 3.

----End

Checking the Appearance of Contact Strips

Context

l To ensure proper contact between the crimped wires and the wire conductors, the heights

and sizes of the contact strips must be standard and the same.

l The contact strips must be parallel to each other, with an offset of less than ± 5°. The top

margin of a strip must be parallel to the axis of the connector, with an offset of less than

± 10°.

AP2030DN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 05 (2016-07-22) Huawei Proprietary and Confidential