User's Manual
Table Of Contents
- About This Document
- Contents
- 1 AP2030DN Overview
- 2 AP Installation
- 3 Logging In to the AP
- 4 Hardware Failures
- 5 Appendix
Figure 5-52 Installed shielded Ethernet connector
Step 4 To remove an Ethernet connector, press the locking key and pull out the connector, as shown
in Figure 5-53.
Figure 5-53 Removing a shielded Ethernet connector
----End
Installing an Unshielded Ethernet Connector
Procedure
Step 1 Hold the male and female connectors, with the male connector facing the female connector, as
shown in Figure 5-54.
AP2030DN
Hardware Installation and Maintenance Guide
5 Appendix
Issue 05 (2016-07-22) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
56