User's Manual

Table Of Contents

Figure 5-54 Holding the male and female unshielded connectors

Step 2 Feed the male connector into the female connector, as shown in Figure 5-55.

Figure 5-55 Feeding the male connector into the female unshielded connector

Step 3 A crisp click indicates that the connector is locked by the locking key. Pull the connector

slightly and ensure that it is securely connected. Figure 5-56 shows an installed Ethernet

connector.

Figure 5-56 Installed unshielded Ethernet connector

AP2030DN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 05 (2016-07-22) Huawei Proprietary and Confidential