User's Manual

Table Of Contents

Procedure

Step 1 Remove the dustproof cap of the FC connector and store it for future use.

Step 2 Align the core pin of the male connector with that of the female connector, as shown in

Figure 5-58.

Figure 5-58 Aligning the male connector with the female connector

Step 3 Align the male connector with the female connector and gently push the male connector until

it is completely seated in the female connector, as shown in Figure 5-59.

Figure 5-59 Feeding the male connector into the female connector

Step 4 Fasten the locking nut clockwise and ensure that the connector is securely installed, as shown

in Figure 5-60.

AP2030DN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 05 (2016-07-22) Huawei Proprietary and Confidential