User's Manual

Table Of Contents

Figure 5-71 Disassembling an MPO fiber connector

----End

5.1.5 Replacing the Mold of the Crimping Tool

Procedure

Step 1 Hold the handles of a pair of COAX crimping tools. Loosen the two fastening screws

counterclockwise, as shown in Figure 5-72.

Figure 5-72 Loosening two fastening screws

Step 2 Hold the handles of the COAX crimping tools to open the self-locking mechanism. The jaw

of the COAX crimping tools opens automatically, as shown in Figure 5-73.

AP2030DN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 05 (2016-07-22) Huawei Proprietary and Confidential