User's Manual

Table Of Contents

No. Name Description

4 Phone Phone interface: connects to

a POTS phone or modem

device.

5 Default Reset button: restores

factory settings and restarts

the device if you hold down

the button more than 3

seconds.

6 DC 12V The device supports the PoE

power supply and DC power

supply.

To connect the device to a

DC power source, use the

power adapter delivered

with the device; otherwise,

the device maybe damaged.

1.2 Indicator Description

AP2030DN provides only one indicator, as shown in Figure 1-2.

Figure 1-2 Indicator on the AP2030DN

Indicato

ETH0 ETH1 ETH2 PhoneETH3

NOTE

l The indicator is located inside the panel, which turns on after the AP is powered on.

l Indicator colors may vary slightly at different temperature.

AP2030DN

Hardware Installation and Maintenance Guide

1 AP2030DN Overview

Issue 05 (2016-07-22) Huawei Proprietary and Confidential