User's Manual

AP4130DN Quick Start Guide Contents
Issue 01 (2015-02-06)
华为专有和保密信息
版权所有 © 华为技术有限公司
18
You need to purchase the security lock separately.
2.6 Connecting Cables
Figure 2-3 and Table 2-2 shows interface and cable connection of AP4130DN。
Figure 2-3 Interfaces of the AP4130DN
Table 2-2 Cable Connection
No. Cable Description
1 Ethernet cable  The network cables used are category-5 enhanced or higher
twisted pairs.
 Ensure that the AP is connected to the Ethernet using the
Ethernet cable that works properly. If the Ethernet cable is
not working properly, for example, RJ45 connectors are
short- circuited, the AP may fail to be powered on or fail to
work. Before connecting an Ethernet cable to the AP, use
the cable test tool to check whether the cable is qualified. If
the cable is unqualified, replace it.
2 DC power adapter  The AP supports the PoE power supply and DC power
supply.
 To connect the AP to a DC power source, use the power