User's Manual

12
Installing the AP
 Against the Ceiling
(1) Fix a clip holder at the rear side of the AP with two M3x6 screws. The wall-mounting bracket is
fixed at the ceiling, and the AP is hung on the bracket. The clip holder prevents the AP from
dropping.
1
2
1. M3x6 screw
2. Clip holder
(2) Remove the ceiling, determine locations of mounting holes based on the distance between two
installation holes, use the hammer drill to drill holes, and fix the wall-mounting bracket to the ceiling.
35mm
UP UP
1
2
3
1. Ceiling
2. Adjustable buckle
3. M4x30 screw
The screws provided for ceiling-mounting of APs are 30 mm long and can be used to fix an AP on a
ceiling not thicker than 15 mm. To install APs on thicker ceilings, customers need to purchase
longer screws.