User's Manual

Table Of Contents

l OT terminal

l Quick Start Guide

l Warranty card

l Qualification Card

l MAC address label

l SN label

NOTE

If the AT needs to be powered by an AC power supply, a PoE adapter must be independently purchased.

Pay attention to the following:

1. Three 2.4 GHz antennas and three 5 GHz antennas are contained in the AP7110DN-AGN

carton, and three 2.4 GHz antennas are contained in the AP7110SN-GN carton. Cartons of

other models do not contain these two types of antennas.

2. Only the AP5130DN carton contains three dual-band antennas.

3. Only the AP6310SN-GN and AP7110 series have OT terminals delivered.

4. Currently, two types of sheet metal mounting brackets are available: sheet metal mounting

bracket for the AP5030DN and AP5130DN, which has four mounting holes (see the left

figure in Figure 2-3), and sheet metal mounting bracket for other indoor AP models, which

has four mounting screws (see the right figure in Figure 2-3).

Figure 2-3 Sheet metal mounting brackets

2.4 Determining the Installation Position

When determining the AP installation position, comply with the following rules:

l Try to reduce the number of obstacles, such as walls, between the AP and user terminals.

l Install the AP away from electronic devices that can cause radio interference, such as the

microwave oven.

l Install the AP in a hidden position that does not affect daily lives and work of residents.

l Install the AP in a site that is free from leaking or dripping water, heavy dew, and humidity,

and take protective measures to prevent water from flowing into the equipment along the

cable.

Indoor APs are usually mounted on a wall or ceiling using sheet metal mounting brackets. The

installation position is determined by the site survey. There must be at least 200 mm clearance

between the cabling end of the AP and the wall. Figure 2-4 shows space requirements.

AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN

Hardware Installation and Maintenance Guide

2 AP Installation

Issue 12 (2015-08-05) Huawei Proprietary and Confidential