User's Manual

Table Of Contents

Context

Figure 5-6 shows the components of a JG terminal and a power cable.

Figure 5-6 Components of a JG terminal and a power cable

A. JG terminal B. Heat-shrinkable tubing C. Insulation layer of a power cable D. Conductor of a power cable

Procedure

Step 1 Strip a part of the insulation to expose the cable conductor with a length of L, as shown in Figure

5-7. The recommended values of L are listed in Table 5-2.

NOTICE

l When you strip a power cable, do not damage the conductor of the cable.

l If the bare crimping terminal is not provided by Huawei, you can adjust the value of L as

required.

Figure 5-7 Stripping a power cable (JG terminal)

AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 12 (2015-08-05) Huawei Proprietary and Confidential