User's Manual

Table Of Contents

Figure 5-10 Heating the heat shrink tubing (JG terminal)

----End

Assembling the Cord End Terminal and the Power Cable

Context

Figure 5-11 shows the components of a cord end terminal and a power cable.

Figure 5-11 Components of a cord end terminal and a power cable

A. Cord end terminal

B. Insulation layer of a power cable C. Conductor of a power cable

Procedure

Step 1 Strip a part of the insulation to expose the cable conductor with a length of L1, as shown in

Figure 5-12. The recommended values of L1 are listed in Table 5-3.

AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 12 (2015-08-05) Huawei Proprietary and Confidential