User's Manual

Table Of Contents

Figure 5-43 Installing an OT terminal, showing the orientation of crimping sleeve

2. Place the spring washer and flat washer in turn, mount a matching screw, and fasten

it clockwise, as shown in Figure 5-44.

Figure 5-44 Installing two terminals back to back

NOTICE

Ensure that the OT terminal is not in contact with other terminals or metal components.

3. Move the cable slightly and ensure that it is securely connected, as shown in Figure

5-45.

AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 12 (2015-08-05) Huawei Proprietary and Confidential