User's Manual

Table Of Contents

----End

Installing an Unshielded Ethernet Connector

Procedure

Step 1 Hold the male and female connectors, with the male connector facing the female connector, as

shown in Figure 5-54.

Figure 5-54 Holding the male and female unshielded connectors

Step 2 Feed the male connector into the female connector, as shown in Figure 5-55.

Figure 5-55 Feeding the male connector into the female unshielded connector

Step 3 A crisp click indicates that the connector is locked by the locking key. Pull the connector slightly

and ensure that it is securely connected. Figure 5-56 shows an installed Ethernet connector.

AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 12 (2015-08-05) Huawei Proprietary and Confidential