User's Manual

Table Of Contents

Figure 5-74 Removing the mold from the COAX crimping tools

Step 4 Place the mold to be installed into the jaw of the COAX crimping tools and align the screw holes,

as shown in Figure 5-75.

Figure 5-75 Installing a new mold in the COAX crimping tool

NOTICE

Keep the short side of the mold inwards and the long side outwards, with the teeth of the mold

aligning from the larger size to the smaller size.

Step 5 Hold the handles of the COAX crimping tools tightly to match the mold and the jaw completely.

Align the screw holes, as shown in Figure 5-76.

AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 12 (2015-08-05) Huawei Proprietary and Confidential