User's Manual

Table Of Contents

Table 1-2 Interfaces on indoor APs

No. Name Description

1 DC 12 V DC power socket: connects a 12 V power

adapter to the AP.

2 Default Reset button: restores factory settings if you

hold down the button more than 3s.

3 ETH/PoE 10/100/1000M bit/s interface: connects to the

wired Ethernet. The interface can connect to

PoE power supply to provide power for the

AP.

4 GE1 10/100/1000M bit/s interface: connects to the

wired Ethernet.

5 GE0/PoE 10/100/1000M bit/s interface: connects to the

wired Ethernet. The interface can connect to

PoE power supply to provide power for the

AP.

6 Console Console interface: connects to a maintenance

terminal for AP configuration and

management.

7 Security slot Connects to a security lock.

8 2.4 GHz antenna port Connects a 2.4 GHz antenna to the AP.

9 5 GHz antenna port Connects a 5 GHz antenna to the AP.

10 Dual-band antenna

port

Connects a dual-band antenna to the AP.

11 Device ground screw Connects a ground cable to the AP.

1.2 Indicator Description

Indoor AP series products provide a single indicator or multiple indicators.

l The AP3010DN-AGN, AP5010DN-AGN, AP5010SN-GN,

AP5030DN, AP5130DN,

AP6010DN-AGN, and AP6010SN-GN provide only a single indicator.

l The AP6310SN-GN, AP7110DN-AGN, and AP7110SN-GN provide multiple indicators:

SYS indicator, Link indicator, and Wireless indicator.

The following table describes indicators on indoor APs.

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 1 Indoor AP Overview

Issue 08 (2014-04-10) Huawei Proprietary and Confidential