User's Manual
Table Of Contents
- About This Document
- Contents
- 1 Indoor AP Overview
- 2 AP Installation
- 3 Logging In to the AP
- 4 Hardware Failures
- 5 Appendix
2.1 Preparing for Installation
This section describes safety precautions and tool preparations for AP installation.
Safety Precautions
l Take proper measures to prevent injuries and device damage.
l Place
the device in a dry and flat position away from any liquid and prevent the device from
slipping.
l Keep the device clean.
l Do not put the device and tools in the aisles.
CAUTION
Only the qualified personnel are permitted to install and remove the device and its accessories.
Before installation and operation, read the safety precautions carefully.
Tool Preparation
To install indoor APs, prepare the following tools:
Figure 2-1 Tools
Utility knife COAX crimping tool
D
iagonal pliers
RJ45 crimping tool Wire stripper
Network cable tester Multimeter Measuring tape
Maker Phillips screwdriver Flat-head screwdriver
Level
A
djustable wrench
Ladder Hammer
ESD gloves 6mm drill bit
H
ammer drill
Huawei Indoor Access Points
Hardware Installation and Maintenance Guide 2 AP Installation
Issue 08 (2014-04-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12