User's Manual
Table Of Contents
- About This Document
- Contents
- 1 Indoor AP Overview
- 2 AP Installation
- 3 Logging In to the AP
- 4 Hardware Failures
- 5 Appendix
25mm~30mm
1 2
3. Fix the mounting bracket to the wall and use the Phillips screwdriver to fasten three
expansion screws into the expansion tubes.
UP
UP
4. Align
the mounting holes at the rear of the AP with the mounting screws on the mounting
bracket and hang the AP on the bracket. Press the AP downwards to secure the AP on the
wall.
Huawei Indoor Access Points
Hardware Installation and Maintenance Guide 2 AP Installation
Issue 08 (2014-04-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18