User's Manual

Table Of Contents

No. Cable Description

6 DC power adapter

l The AP supports the PoE power supply

and DC power supply.

l To connect the AP to a DC power source,

use the power adapter delivered with the

AP; otherwise, the AP maybe damaged.

NOTE

l Different power adapters are delivered with indoor AP products according to standards in the countries or

regions where the AP products are delivered. These countries and regions are identified by the barcode on

AP's nameplate, including: EU (Europe), UK (United Kingdom), CN (China), AU (Australia), US (United

States), and USA (the AP is sold only in the U.S).

l The AP products sold in the U.S have a fixed country code US, and the country code change function is

disabled.

Pay attention to the following points when installing antennas

l Antennas of the AP6310SN-GN, AP7110DN-AGN, AP7110SN-GN, and AP5130DN

must comply with local laws and regulations.

l Antennas need to be installed by qualified personnel. An AP can only use the antennas

delivered with it.

l You need to connect external antennas to the AP7110 series and AP5130DN. Exercise

caution when bending the antennas. Misoperation may hurt your hands.

l When replacing WA633SNs with AP6310SN-GNs, you need to convert SMA connectors

to Type N connectors (see Figure a and Figure b). You can also make new feeder lines

matching the connectors of the AP6310SN-GNs (see Figure c).

Pay attention to the following points when installing network cables

l Before

connecting an Ethernet cable to the AP, use the cable test tool to check whether the

cable is qualified. If the cable is unqualified, replace it.

l Do not connect the service network cable to the console port. Otherwise, the AP may be

damaged when the PoE power supply is used.

l Use standard RJ45 connectors on network cables for the AP5010 series.

l Before removing network cables or power cables from an AP5030DN or AP5130DN,

remove the AP from the mounting bracket first to prevent damage to the network cables or

power cables.

l The cable cannot exceed 100 meters.

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 2 AP Installation

Issue 08 (2014-04-10) Huawei Proprietary and Confidential