User's Manual

Table Of Contents

2.7 Installing the Security Lock

There is a security slot on the AP. You can lock the AP to an immovable object to prevent the

AP against theft. The detailed procedures are as follows:

Fasten the cable of the security lock to an immovable object around.

2. Insert the security lock into the security slot and lock it.

2.4G

Lock hole

Security lock

NOTE

You need to purchase the security lock separately.

2.8 Checking the AP After Installation

Table 2-4 shows the items to be checked after AP installation is complete.

Table 2-4 AP installation checklist

No. Check Item

1 The AP is installed by strictly following the design draft. The installation

position meets space requirements, with maintenance space reserved.

2 The AP is securely installed.

3 The power cables and PGND cables are intact and not spliced.

4 Terminals of the power cables and PGND cables are welded or cramped

firmly.

5 All power cables or PGND cables are not short-circuited or reversely

connected and must be intact with no damage.

6 The power cables and ground cables are separated from other cables and

bundled separately.

7 The working ground, protection ground, and surge protection ground share

the same group of ground bars.

8 Connectors of signal cables are complete, intact, and tightly connected.

The signal cables are not damaged or broken.

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 2 AP Installation

Issue 08 (2014-04-10) Huawei Proprietary and Confidential