User's Manual

Table Of Contents

Matching Pins of Wires Wire Color

8 Brown

Step 7 Cut off the surplus cables along the lower edge of the wire holder, as shown in Figure 5-24.

Figure 5-24 Cutting off surplus cables

Step 8 Put

the connector body onto the wire holder and turn the metal shell by 90°, as shown in Figure

5-25.

NOTE

Ensure that the wire holder is in good contact with the connector body.

Figure 5-25 Put the connector body onto the wire holder

Step 9 Push the metal shell towards the connector body until the wire holder and the connector body

are engaged completely. Crimp the connector.

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 5 Appendix

Issue 08 (2014-04-10) Huawei Proprietary and Confidential