User's Manual

Table Of Contents

Figure 5-26 Crimping the connector

Step 10 Push the jacket towards the metal shell until the metal shell is covered. This completes the

assembly of one end of the cable, as shown in Figure 5-27.

Figure 5-27 Pushing the metal shell

Step 11 To complete the assembly of the other end, repeat Step 1 through Step 10.

----End

Assembling an Unshielded RJ45 Connector and Ethernet Cable

Context

Figure 5-28 shows the components of an unshielded RJ45 connector and cable.

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 5 Appendix

Issue 08 (2014-04-10) Huawei Proprietary and Confidential