User's Manual

Table Of Contents

NOTE

If a tester is not available, you can use a multimeter to perform a simple test, as shown in Figure 5-41.

Figure 5-41 Testing the connection of an Ethernet cable

----End

5.1.4 Installing Cable Accessories

Precautions for Installing Cable Accessories

Tools

NOTE

The illustrations in this document may differ from actual situations. For example, in this document, the

adapters of cable connectors have separate interfaces. In the actual situation, the adapters may have

interfaces fixed on equipment.

Use dedicated tools provided or specified by Huawei and follow the installation procedure

described here.

Bending Radius

Unless

otherwise specified, bending radiuses (R) of cables or fibers must meet the requirements

listed in Table 5-9.

Table 5-9 Bending radiuses of cables or fibers

Cable or Fiber Bending Radius (R)

Ordinary cable

In normal cases, R ≥ 2d. When the cable is

connected with a connector, R ≥ 5d.

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 5 Appendix

Issue 08 (2014-04-10) Huawei Proprietary and Confidential