User's Manual

Table Of Contents

Figure 5-42 Aligning the OT terminal with a connecting hole

NOTE

When you install an OT terminal, the crimping sleeve is installed as shown in Figure 5-43,

where A is correct and B is wrong.

Figure 5-43 Installing an OT terminal, showing the orientation of crimping sleeve

2. Mount

a matching screw and fasten it in the clockwise direction, as shown in Figure

5-44.

Figure 5-44 Installing two terminals back to back

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 5 Appendix

Issue 08 (2014-04-10) Huawei Proprietary and Confidential