User's Manual

Table Of Contents

NOTICE

Ensure that the OT terminal is not in contact with other terminals or metal components.

3. Move the cable slightly and ensure that it is securely connected, as shown in Figure

5-45.

Figure 5-45 Installed OT terminal

l Install two OT terminals on a post.

Before

you install two OT terminals on a post, ensure that the two terminals can be installed

on the post and that the electrical connecting pieces have a large contact area. Two OT

terminals can be installed using any of these methods:

– Bend the upper OT terminal at a 45- or 90-degree angle, as shown in Figure 5-46.

– Cross the two terminals, as shown in Figure 5-47.

Figure 5-46 Bending the upper OT terminal at a 45- or 90-degree angle

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 5 Appendix

Issue 08 (2014-04-10) Huawei Proprietary and Confidential