User's Manual

Table Of Contents

Figure 5-50 Holding the male and female connectors

Step 2 Insert the male connector into the female connector, as shown in Figure 5-51.

Figure 5-51 Feeding the male connector into the female connector

Step 3 When you hear a click, the cable connector is completely inserted in the port. (The clip on the

cable

connector pops up to fix the connector in the port.) Pull the connector slightly and ensure

that it is securely connected.

Figure 5-52 Installed Ethernet connector

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 5 Appendix

Issue 08 (2014-04-10) Huawei Proprietary and Confidential