User's Manual

Table Of Contents

Step 4 To

remove an Ethernet connector, press the locking key and pull out the connector, as shown in

Figure 5-53.

Figure 5-53 Removing an Ethernet connector

----End

Installing an Unshielded Ethernet Connector

Procedure

Step 1 Hold the male and female connectors, with the male connector facing the female connector, as

shown in Figure 5-54.

Figure 5-54 Holding the male and female connectors

Step 2 Feed the male connector into the female connector, as shown in Figure 5-55.

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 5 Appendix

Issue 08 (2014-04-10) Huawei Proprietary and Confidential