User's Manual

Table Of Contents

Figure 5-55 Feeding the male connector into the female connector

Step 3 A

crisp click indicates that the connector is locked by the locking key. Pull the connector slightly

and ensure that it is securely connected. Figure 5-56 shows an installed Ethernet connector.

Figure 5-56 Installed Ethernet connector

Step 4 To

remove an Ethernet connector, press the locking key and pull out the connector, as shown in

Figure 5-57.

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 5 Appendix

Issue 08 (2014-04-10) Huawei Proprietary and Confidential