User's Manual

Table Of Contents

Figure 5-57 Removing an Ethernet connector

----End

Installing Fiber Connectors

Context

NOTICE

l After you remove the dustproof cap, ensure that the fiber pins are clean and install them as

soon as possible.

l When you disassemble fiber connectors, you must use a dedicated tool if the connectors are

densely installed.

Cleaning Fiber Connectors

Procedure

Step 1 Clean the pins of a fiber connector by using lint-free cotton and alcohol.

Step 2 Clean the pins again by using dust-free cotton. If necessary, clean the pins by using an air gun.

----End

Installing an FC Fiber Connector

Procedure

Step 1 Remove the dustproof cap of the FC connector and store it for future use.

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 5 Appendix

Issue 08 (2014-04-10) Huawei Proprietary and Confidential