User's Manual

Table Of Contents

Figure 5-65 Disassembling an LC fiber connector

----End

Installing the SC Fiber Connector

Procedure

Step 1 Remove the dustproof cap of the SC fiber connector and store it for future use.

Step 2 Align

the core pin of the male connector with that of the female connector, as shown in Figure

5-66.

Figure 5-66 Aligning the male connector with the female connector

Step 3 Feed the fiber connector into the female connector, with your fingers holding the shell of the

fiber connector (not the pigtail). When you hear a click, the fiber connector is secured by the

internal clips. Pull the fiber connector gently. If the connector does not loosen, the installation

is complete. See Figure 5-67.

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 5 Appendix

Issue 08 (2014-04-10) Huawei Proprietary and Confidential