User's Manual

Table Of Contents

Figure 5-67 Installed SC fiber connector

Step 4 Before you disassemble an SC fiber connector, unlock the male connector by removing it

slightly, as shown in Figure 5-68.

Figure 5-68 Disassembling an SC fiber connector

----End

Installing an MPO Connector

Procedure

Step 1 Remove the dustproof cap of the MPO fiber connector and store it for future use.

Step 2 Align

the core pin of the male connector with that of the female connector, as shown in Figure

5-69.

Huawei Indoor Access Points

Hardware Installation and Maintenance Guide 5 Appendix

Issue 08 (2014-04-10) Huawei Proprietary and Confidential