User's Manual

Table Of Contents

NOTE

l If a PoE adapter or a DC power adapter is required, you need to purchase it separately.

l Antennas are provided only in the carton of the AP6150DN.

2.4 Determining the Installation Position

Indoor APs are usually mounted on a wall or ceiling using sheet metal mounting brackets.

The installation position is determined by the site survey. There must be at least 200 mm

clearance between the cabling end of the AP and the wall. Figure 2-2 shows space

requirements.

Figure 2-2 Mounting an AP

≥200mm

Floor

Celling

Wall

When determining the AP installation position, comply with the following rules:

l Try to reduce the number of obstacles, such as walls, between the AP and user terminals.

l Place the AP far away from electronic devices that may produce radio interference, such

as microwave ovens, other APs, antennas, and other radio communication devices. For

details, see Table 2-2.

l Install the AP in a hidden position that does not affect daily lives and work of residents.

l Install the AP in a site that is free from leaking or dripping water, heavy dew, and

humidity, and take protective measures to prevent water from flowing into the equipment

along the cable.

l Do not install the AP in an environment with high temperature, dust, poisonous gases,

flammable or explosive objects, electromagnetic interference (from a radar station, radio

station, or substation), unstable voltage, violent shakes, or strong noise.

AP6050DN & AP6150DN

Hardware Installation and Maintenance Guide

2 AP Installation

Issue 03 (2016-09-30) Huawei Proprietary and Confidential