User's Manual

Table Of Contents

1. Remove two ceiling tiles around the T-rail, use screws to fix the adjustable buckle to the

mounting bracket, hook the adjustable buckle to the T-rail, and secure the screw on the

adjustable buckle to fasten the mounting bracket and T-rail.

2. Connect the cables. For details, see 2.6 Cable Connection.

3. Hang the AP on the mounting holes by aligning the mounting screws at the rear of the

AP with the mounting holes on the bracket and push the AP horizontally to secure the

AP.

NOTE

l Before fixing the adjustable buckle with a screw, you need to adjust the buckle to a proper position

based on the T-rail width.

l Ensure that the AP is correctly installed on the mounting bracket and there must be 200 mm space

above and around the AP for maintenance.

AP6050DN & AP6150DN

Hardware Installation and Maintenance Guide

2 AP Installation

Issue 03 (2016-09-30) Huawei Proprietary and Confidential