User's Manual

Table Of Contents

2.6 Cable Connection

Table 2-3 describes cable connections (the AP6150DN is used as an example).

Figure 2-3 Appearance of the AP6150DN

Table 2-3 Cable connections

No.

Cable or Device Description

1 USB flash drive Connects to a USB flash drive to extend the storage space

of the AP, and provides a maximum of 2.5 W power.

2 Ground cable Connects the AP to the ground.

3 Network cable

l CAT5e cables or higher must be used.

l The service network cable and PoE input cable cannot

be connected to the console port. Otherwise, the AP

may be damaged when using PoE power supply. The

network cable length cannot exceed 100 m.

l If the AP needs to connect to the Ethernet, ensure that

the Ethernet cable is working properly. If the Ethernet

cable is not working properly, for example, RJ45

connectors are short-circuited, the AP may fail to be

powered on or fail to work. Before connecting an

Ethernet cable to the AP, use the cable test tool to

check whether the cable is qualified. If the cable is

unqualified, replace it.

4 DC power adapter When the AP uses the DC power supply, use a power

adapter for power supply; otherwise, the AP may be

damaged.

AP6050DN & AP6150DN

Hardware Installation and Maintenance Guide

2 AP Installation

Issue 03 (2016-09-30) Huawei Proprietary and Confidential