User's Manual

Table Of Contents

Figure 5-67 Installed SC fiber connector

Step 4 To disassemble an SC fiber connector, hold the shell of the connector (do not hold the fiber)

and gently pull the connector in the direction vertical to the adapter. Unlock the male

connector, and then separate it from the shell, as shown in Figure 5-68.

Figure 5-68 Disassembling an SC fiber connector

----End

Installing an MPO Connector

Procedure

Step 1 Remove the dustproof cap of the MPO fiber connector and store it for future use.

Step 2 Align the core pin of the male connector with that of the female connector, as shown in

Figure 5-69.

AP6050DN & AP6150DN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 03 (2016-09-30) Huawei Proprietary and Confidential