User's Manual
Table Of Contents
- About This Document
- Contents
- 1 Product Overview
- 2 AP Installation
- 3 Logging In to the Device
- 4 Hardware Failures
- 5 Appendix
Figure 5-73 Pliers jaw opening automatically
Step 3 Remove the mold from the COAX crimping tools, as shown in Figure 5-74.
Figure 5-74 Removing the mold from the COAX crimping tools
Step 4 Place the mold to be installed into the jaw of the COAX crimping tools and align the screw
holes, as shown in Figure 5-75.
AP6050DN & AP6150DN
Hardware Installation and Maintenance Guide
5 Appendix
Issue 03 (2016-09-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
68