User's Manual

Table Of Contents

Table 1-2 Interface description

No. Name Description

1 Default Reset button: restores factory settings and restarts the

device if you hold down the button more than 3 seconds.

2 USB port Connects to a USB flash drive to extend the storage space

of the AP, and provides a maximum of 2.5 W power.

3 CONSOLE Connects to a maintenance terminal for AP configuration

and management.

4 Ground screw Connects the AP to a ground cable.

5 GE1 10/100/1000M port: connects to the wired Ethernet.

6 GE0/PoE 10/100/1000M port: connects to the wired Ethernet. The

port can connect to a PoE power supply device to provide

power for APs.

7 DC 12V Connects to PoE or DC power supply.

NOTE

When the AP uses the DC power supply, use a power adapter for

power supply; otherwise, the AP may be damaged.

8 Security slot Connects to a security lock.

9 Antenna port Connects to an external antenna for transmitting and

receiving service signals. The ports are provided only on

APs using external antennas.

1.2 Indicator Description

The AP6050DN and AP6150DN provide only one indicator, as shown in Figure 1-1.

NOTE

Indicator colors may vary slightly at different temperature.

Figure 1-1 Indicator

Indicator

AP6050DN & AP6150DN

Hardware Installation and Maintenance Guide

1 Product Overview

Issue 03 (2016-09-30) Huawei Proprietary and Confidential