User's Manual

ManualsBrandsHuawei Technologies ManualsComputers & AccessoriesWireless LAN Access Point

Table Of Contents

AP7110DN-AGN Wireless LAN Access Point

V200R002C00

Product Description

Issue 01

Date 2012-10-31

HUAWEI TECHNOLOGIES CO., LTD.

Summary of content (18 pages)

PAGE 1
AP7110DN-AGN Wireless LAN Access Point V200R002C00 Product Description Issue 01 Date 2012-10-31 HUAWEI TECHNOLOGIES CO., LTD.
PAGE 2
Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
PAGE 3
AP7110DN-AGN Wireless LAN Access Point Product Description Contents Contents 1 Product Orientation and Characteristics...................................................................................1 2 Product Structure...........................................................................................................................5 3 Functions and Features.................................................................................................................
PAGE 4
AP7110DN-AGN Wireless LAN Access Point Product Description 1 1 Product Orientation and Characteristics Product Orientation and Characteristics Product Orientation The AP7110DN-AGN is an enhanced indoor dual-band 3x3 MIMO access point (AP) that supports 2.4 GHz and 5 GHz frequency bands. It complies with IEEE 802.11a/b/g/nsupports 2.4 GHz and 5 GHz frequency bands, and has enhanced coverage performance and protection capabilities. It supports wireless bridging, complies with IEEE 802.
PAGE 5
AP7110DN-AGN Wireless LAN Access Point Product Description 1 Product Orientation and Characteristics Figure 1-1 Fit AP networking NMS Authentication system AC Switch AP1 AP n …… WLAN teminal Residential Business users users Management channel between NMS and AC Management channel between the AC and the AP and data channel Where data flows are encapsulated with CAPWAP Channel where data flows are not encapsulated with CAPWAP In this networking, the AP7110DN-AGN functions as a Fit AP that provides
PAGE 6
AP7110DN-AGN Wireless LAN Access Point Product Description 1 Product Orientation and Characteristics Figure 1-3 WDS networking (point-to-multipoint) LAN Segment 2 AP 2 LAN Segment 1 LAN Segment 3 AP 1 AP 3 LAN Segment 4 AP 4 In this networking, the AP7110DN-AGN connects two or more independent wired or wireless LANs through wireless links to realize communication between the LANs. In a Wireless Distribution System (WDS), the AP7110DN-AGN supports point-to-point, point-to-multipoint networking modes.
PAGE 7
AP7110DN-AGN Wireless LAN Access Point Product Description 1 Product Orientation and Characteristics Product Characteristics Description High security The AP7110DN-AGN supports multiple authentication and encryption modes and provides various measures to enhance system security: l Wired Equivalent Privacy (WEP) l Wi-Fi Protected Access (WPA)/WPA2 l WLAN Authentication and Privacy Infrastructure (WAPI) l 802.
PAGE 8
AP7110DN-AGN Wireless LAN Access Point Product Description 2 Product Structure 2 Product Structure Appearance Figure 2-1 shows the appearance of the AP7110DN-AGN. NOTE The actual device appearance may differ from the figure, but the appearance does not affect device Figure 2-1 Appearance of the AP7110DN-AGN Ports Figure 2-2 shows ports on the AP7110DN-AGN. Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
PAGE 9
AP7110DN-AGN Wireless LAN Access Point Product Description 2 Product Structure Figure 2-2 Ports of the AP7110DN-AGN 1 2 3 4 5 6 1. Ground port: connects to a ground cable to ground an AP. 2. Console port. 3. ETH/PoE: 10/100/1000M port, which connects to the Ethernet. The port can connect to a PoE switch or a PoE power source to provide power for APs. 4. Default: restores factory settings. 5. Power input port: 12 V DC. 6. Lock port: protects the AP7110DN-AGN against theft.
PAGE 10
AP7110DN-AGN Wireless LAN Access Point Product Description Information Type SYS LED Blinki ng (0.5 Hz) Issue 01 (2012-10-31) 2 Product Structure Link LED Steady or blinkin g green WiFi LED Description Blinkin g yellow The system is working properly, but the Ethernet is not connected. The AP has wireless users connected to the 5 GHz band and is transmitting data. The indicator blinks more quickly when more packets are being transmitted.
PAGE 11
AP7110DN-AGN Wireless LAN Access Point Product Description 3 Functions and Features 3 Functions and Features Functions and Features Supported by the AP7110DN-AGN Table 3-1 Features Features Description WLAN features l Compliance with IEEE 802.11a/b/g/n, providing a maximum rate of 450 Mbit/s216 Mbit/s for each radio l Maximum ratio combining (MRC) l Maximum-likelihood detection (MLD) l Aggregate data units, including A-MPDU (Tx/Rx) and A-MSDU (Rx only) l 802.
PAGE 12
AP7110DN-AGN Wireless LAN Access Point Product Description Features Description Network features l Compliance with IEEE 802.
PAGE 13
AP7110DN-AGN Wireless LAN Access Point Product Description Features Description Maintenance features l AP management and maintenance by the AC 3 Functions and Features l Plug-and-play: automatic AC discovery and automatic configuration loading l Batch upgrade l Debugging using Telnet and the serial interface l Real-time configuration monitoring and fast fault location by using the NMS l System status alarm Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.
PAGE 14
AP7110DN-AGN Wireless LAN Access Point Product Description 4 Technical Specifications 4 Technical Specifications Specifications Table 4-1 Specifications of the AP7110DN-AGN Item Description Technical specifications Dimensions (H x W x D) 43 mm x 200 mm x 200 mm Weight 1.5 kg System memory l 256 MB DRAM l 32 MB flash memory Power specifications Power input l DC 12V±10% l POE Power: -48V DC l PoE function in compliance with IEEE 802.
PAGE 15
AP7110DN-AGN Wireless LAN Access Point Product Description 4 Technical Specifications Antenna Parameters Table 4-2 Antenna parameters of the AP7110DN-AGN Item Description Antenna type External antenna Antenna gain 2.4GHz: 2.5 dBi Frequency band Dual bands: 2400 MHz to 2485 MHz (2.
PAGE 16
AP7110DN-AGN Wireless LAN Access Point Product Description Item 4 Technical Specifications Description 65 @ MCS7 135 @ MCS7 72.2 @ MCS7 150 @ MCS7 13 @ MCS8 27 @ MCS8 14.4 @ MCS8 30 @ MCS8 26 @ MCS9 54 @ MCS9 28.9 @ MCS9 60 @ MCS9 39 @ MCS10 81 @ MCS10 43.3 @ MCS10 90 @ MCS10 52 @ MCS11 108 @ MCS11 57.8 @ MCS11 120 @ MCS11 78 @ MCS12 162 @ MCS12 86.7 @ MCS12 180 @ MCS12 104 @ MCS13 216 @ MCS13 115.
PAGE 17
AP7110DN-AGN Wireless LAN Access Point Product Description 4 Technical Specifications Item Description Receiver sensitivity 2.4 GHz 2.4 GHz 5 GHz 802.11b (CCK) 802.11g (nonHT20) 802.11a (non-HT20) l -91 dBm @ 6 Mb/s l -90 dBm @ 9 Mb/s l -90 dBm @ 9 Mb/s l -85 dBm @ 18 Mb/s l -93 dBm @ 1 Mb/s l -91 dBm @ 2 Mb/s l -90 dBm @ 5.
PAGE 18
AP7110DN-AGN Wireless LAN Access Point Product Description 4 Technical Specifications – IEC 60950-1 – EN 60950-1 – GB 4943 l Radio standards – ESTI EN 300 328 – ESTI EN 301 893 – RSS-210 l EMC standards – EN 301.489–1 – EN 301.489–17 – ICES-003 – YD/T 1312.2-2004 – EN55022 (Class B) l IEEE standards – IEEE 802.11a/b/g – IEEE 802.11n – IEEE 802.11h – IEEE 802.11d – IEEE 802.11e l Security standards – 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA – 802.