User's Manual

Figure 1-3 WDS networking (point-to-multipoint)
AP 2
AP 1
AP 3
AP 4
LAN Segment 1
LAN Segment 2
LAN Segment 3
LAN Segment 4
In this networking, the AP7110DN-AGN connects two or more independent wired or wireless
LANs through wireless links to realize communication between the LANs. In a Wireless
Distribution System (WDS), the AP7110DN-AGN supports point-to-point, point-to-multipoint
networking modes. The AP implements wireless bridging and access functions using 5 GHz and
2.4 GHz frequency bands.
Product Characteristics
The AP7110DN-AGN has the following characteristics on the WLAN.
Product
Characteristics
Description
Highly reliable
wireless access
l Complies with IEEE 802.11 a/b/g/n.
l Supports3x3 MIMO and provides a maximum rate of 450 Mbit/s for
each spatial stream.
l Uses Wi-Fi Multimedia (WMM) to implement priority scheduling
based on the service type (voice, video, or data), and supports
priority mapping on the air interface and wired interface.
l Supports wired link integrity check.
l Supports load balancing.
l Supports roaming without service interruptions.
l Supports AC Dual-Link Backup.
l Supports the beamforming technique.
l Uses the latest 802.11n chip to provide higher performance and
wider coverage.
l Has a strong coverage capability.
Comprehensive
user access
control capability
l Supports access control lists (ACLs) and user access controls based
on user group policies.
l Provides per-user bandwidth management.
l Supports user isolation policies.
l Supports AC authentication.
AP7110DN-AGN Wireless LAN Access Point
Product Description 1 Product Orientation and Characteristics
Issue 01 (2012-10-31) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3