User's Manual

Table Of Contents

Figure 2-2 Ports of the AP7110DN-AGN

1 2 43 65

1. Ground port: connects to a ground cable to ground an AP.

2. Console port.

3. ETH/PoE: 10/100/1000M port, which connects to the Ethernet. The port can connect to a

PoE switch or a PoE power source to provide power for APs.

4. Default: restores factory settings.

5. Power input port: 12 V DC.

6. Lock port: protects the AP7110DN-AGN against theft.

LED Indicators

Information

Type

SYS

LED

Link

LED

WiFi

LED

Description

Startup status Steady

green

Off Off The device is being started.

Blinki

green

Off Off The system is working properly.

Steady

red

Off Off The system fails to load the DRAM or

system software.

Blinki

ng (0.5

Hz)

Off Off The system is working properly. However,

the Ethernet is not connected. Radios are

disabled and no user is connected to the AP.

Blinkin

g green

The system is working properly, but the

Ethernet is not connected. The AP has

wireless users connected to the 2.4 GHz

band and is transmitting data. The indicator

blinks more quickly when more packets are

being transmitted.

AP7110DN-AGN Wireless LAN Access Point

Product Description 2 Product Structure

Issue 01 (2012-10-31) Huawei Proprietary and Confidential